X
  GO

 Thermocouple Replacement (Universal Type)

Almost all tank type water heaters built prior 2012 use universal type thermocouples.

Over time the end of the tip deteriorates and the thermocouple fails, which results in no hot water.

In this case you don't yet need a new water heater. This condition is repairable.

Call now for same day service!       


 Tankless Water Heater Flush/Descaling

This procedure is of significant importance for the proper and worry free operation of your water heater.

Often, Tankless Manufacturers require proof of proper service records, prior to authorizing parts or unit

replacement in case of a warranty claim. The service includes 1 hour flush with special fluid, dust-off

the unit of foreign objects, clean all filters and condensate trap. Service is required annually.

Schedule your appointment now!         







Temperature & Pressure Relief Valve Replacement

 The temperature and pressure relief valve (T & P) is a safety device limiting temperature and pressure levels in a water heater. Each T & P has both a temperature and pressure rating. Normally, the temperature and pressure relief valve will have a temperature rating for 210°F. A probe (part of the relief valve) extends into the tank measuring the stored water temperature. This probe must be within the top six inches of the water heater. However, if the water heater’s thermostat malfunctions, higher than normal water temperatures could be produced. Once the probe senses a temperature exceeding its temperature rating, the relief valve will open to full capacity releasing “very hot” water until the temperature is below its reset temperature.

Symptoms of faulty T&P Valve 

The lever froze and you can't lift it up to release water
The lever won't fully close allowing the water to run
Intermittent weeping and/or dribbling from the relief valve
Large volume of hot water sporadically discharged from the relief valve

Schedule your appointment now!        







Temperature & Pressure Relief Valve Replacement

 The temperature and pressure relief valve (T & P) is a safety device limiting temperature and pressure levels in a water heater. Each T & P has both a temperature and pressure rating. Normally, the temperature and pressure relief valve will have a temperature rating for 210°F. A probe (part of the relief valve) extends into the tank measuring the stored water temperature. This probe must be within the top six inches of the water heater. However, if the water heater’s thermostat malfunctions, higher than normal water temperatures could be produced. Once the probe senses a temperature exceeding its temperature rating, the relief valve will open to full capacity releasing “very hot” water until the temperature is below its reset temperature.

Symptoms of faulty T&P Valve 

The lever froze and you can't lift it up to release water
The lever won't fully close allowing the water to run
Intermittent weeping and/or dribbling from the relief valve
Large volume of hot water sporadically discharged from the relief valve

Schedule your appointment now!        







Temperature & Pressure Relief Valve Replacement

 The temperature and pressure relief valve (T & P) is a safety device limiting temperature and pressure levels in a water heater. Each T & P has both a temperature and pressure rating. Normally, the temperature and pressure relief valve will have a temperature rating for 210°F. A probe (part of the relief valve) extends into the tank measuring the stored water temperature. This probe must be within the top six inches of the water heater. However, if the water heater’s thermostat malfunctions, higher than normal water temperatures could be produced. Once the probe senses a temperature exceeding its temperature rating, the relief valve will open to full capacity releasing “very hot” water until the temperature is below its reset temperature.

Symptoms of faulty T&P Valve 

The lever froze and you can't lift it up to release water
The lever won't fully close allowing the water to run
Intermittent weeping and/or dribbling from the relief valve
Large volume of hot water sporadically discharged from the relief valve

Schedule your appointment now!        







Temperature & Pressure Relief Valve Replacement

 The temperature and pressure relief valve (T & P) is a safety device limiting temperature and pressure levels in a water heater. Each T & P has both a temperature and pressure rating. Normally, the temperature and pressure relief valve will have a temperature rating for 210°F. A probe (part of the relief valve) extends into the tank measuring the stored water temperature. This probe must be within the top six inches of the water heater. However, if the water heater’s thermostat malfunctions, higher than normal water temperatures could be produced. Once the probe senses a temperature exceeding its temperature rating, the relief valve will open to full capacity releasing “very hot” water until the temperature is below its reset temperature.

Symptoms of faulty T&P Valve 

The lever froze and you can't lift it up to release water
The lever won't fully close allowing the water to run
Intermittent weeping and/or dribbling from the relief valve
Large volume of hot water sporadically discharged from the relief valve

Schedule your appointment now!        







Temperature & Pressure Relief Valve Replacement

 The temperature and pressure relief valve (T & P) is a safety device limiting temperature and pressure levels in a water heater. Each T & P has both a temperature and pressure rating. Normally, the temperature and pressure relief valve will have a temperature rating for 210°F. A probe (part of the relief valve) extends into the tank measuring the stored water temperature. This probe must be within the top six inches of the water heater. However, if the water heater’s thermostat malfunctions, higher than normal water temperatures could be produced. Once the probe senses a temperature exceeding its temperature rating, the relief valve will open to full capacity releasing “very hot” water until the temperature is below its reset temperature.

Symptoms of faulty T&P Valve 

The lever froze and you can't lift it up to release water
The lever won't fully close allowing the water to run
Intermittent weeping and/or dribbling from the relief valve
Large volume of hot water sporadically discharged from the relief valve

Schedule your appointment now!        







Temperature & Pressure Relief Valve Replacement

 The temperature and pressure relief valve (T & P) is a safety device limiting temperature and pressure levels in a water heater. Each T & P has both a temperature and pressure rating. Normally, the temperature and pressure relief valve will have a temperature rating for 210°F. A probe (part of the relief valve) extends into the tank measuring the stored water temperature. This probe must be within the top six inches of the water heater. However, if the water heater’s thermostat malfunctions, higher than normal water temperatures could be produced. Once the probe senses a temperature exceeding its temperature rating, the relief valve will open to full capacity releasing “very hot” water until the temperature is below its reset temperature.

Symptoms of faulty T&P Valve 

The lever froze and you can't lift it up to release water
The lever won't fully close allowing the water to run
Intermittent weeping and/or dribbling from the relief valve
Large volume of hot water sporadically discharged from the relief valve

Schedule your appointment now!        

Pressure Reducing Valve Replacement

Ensuring Practical, Safe Working Water Pressures Municipal and private water supply companies use pumps and pumping stations

to boost water supply pressures in supply mains to be able to supply water for fire fighting, high rise buildings to overcome loss of pressure

as the elevation increases, and to maintain water supply in water towers and supply tanks. Pressure in water supply mains can exceed 200psi

Most plumbing codes require water pressure reducing valves on domestic systems where the municipal water main's pressure exceeds 80psi

Higher pressures could rupture pipes, damage fixtures,and injure the people using them.

Symptoms of faulty Pressure Reducing Valve

High water flow, pressure over 80 PSI, rattling and  noisy pipes.

Schedule your appointment now!       


Request Price Quote or Set Up an Appointment On-line













           


RHEEM ENDORSES US AS AN AUTHORIZED DEALER & INSTALLER


Read Our Reviews